Size:
4
Pay in installments of $7.00 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jun 29 - Jul 4
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
dresser coupling Dresser Style 38 Bolted Coupling – WatermainsupplyDescription Dresser Bolted Coupling Style 38 Bolted Coupling Steel Pipe Flexible mechanical coupling for water, wastewater, and industrial piping. Plain end steel pipe in nominal sizes in through 48 in. AWWA C219 compliant. Sizes in 48 in AWWA C219 Compliant NSF 61 & 372 Certified 6 Gasket Compounds Available Stainless Steel Option Fusion Bonded Epoxy Coating Widely separated pipe ends? For applications where a standard body coupling cannot span the
Description
Dresser Bolted Coupling
Style 38 Bolted Coupling
Steel Pipe
Flexible mechanical coupling for water, wastewater, and industrial piping. Plain-end steel pipe in nominal sizes ½ in through 48 in. AWWA C219 compliant.
Sizes ½ in – 48 in
AWWA C219 Compliant
NSF 61 & 372 Certified
6 Gasket Compounds Available
Stainless Steel Option
Fusion-Bonded Epoxy Coating
Widely separated pipe ends? For applications where a standard-body coupling cannot span the gap, the long-body Dresser Style 40 bridges wider pipe separations without spool pieces or additional fittings.
View Style 40 →
Overview
The Dresser Style 38 is a bolted mechanical coupling engineered for flexible, leakproof connections on steel pipe in water, wastewater, and industrial piping systems. No threading, beveling, or precise pipe alignment required — installs with standard wrenches only.
The resilient gasket design absorbs vibration, accommodates thermal pipe movement, and allows angular deflection — enabling curves to be laid using straight pipe lengths without bends or elbows. Compliant with AWWA C219.
Key Advantages
Tool-Only Installation
No threading, beveling, or exact alignment required. Installs with standard wrenches directly in the field.
Absorbs Pipe Movement
Resilient gaskets absorb vibration and accommodate thermal expansion and contraction at the joint.
Angular Deflection
Permits angular deflection — curves can be laid with straight pipe, reducing fittings cost and labor.
½ in to 48 in Standard
One product line covers virtually any plain-end steel pipe application. Larger custom sizes available on request.
Fusion-Bonded Epoxy
Standard coating provides superior corrosion protection in buried, submerged, and aggressive service.
All-Stainless Option
Available in Type 304 or Type 316 stainless steel for highly corrosive service conditions.
6 Gasket Compounds
Compatible with potable water, wastewater, petroleum, chemicals, gases, and high-temperature service.
AWWA C219 + NSF 61/372
Industry-standard certifications for Grade 27 and EPDM gasket configurations.
Materials of Construction
Followers (½ in – 1½ in)
Ductile or Malleable Iron
Small-bore service
Followers (2 in & Larger)
AISI C1012 or ASME SA36 Steel
Single-piece thru 12 in; 2-piece bar for larger
Middle Ring
ASTM A513 / A635 / SA675 Gr.60
Steel sleeve body
Bolts & Nuts
AWWA C111 / ANSI A21.11
E-coated steel standard; Type 316 SS optional
Standard Gasket
Grade 27 Buna-S
See Gasket Options below
Standard Coating
Fusion-Bonded Epoxy
Factory-applied
Gasket Material Options
The Style 38 is supplied with one of six gasket compounds depending on service media, temperature, and chemical compatibility. Select the gasket matching your application from variant options at checkout or contact us for compounds not shown.
Grade 27 Buna-S (Standard)
Styrene-butadiene rubber. General water and wastewater service. NSF 61 and NSF 372 certified for potable water.
Grade 42 Buna-N
Nitrile rubber. Petroleum products, oils, hydrocarbons, and fuel service.
Fluorocarbon (Viton)
For aggressive chemicals and high-temperature fluids where standard rubber compounds would fail.
Butyl
Gases, chlorinated water, and ozone service. Excellent gas permeation resistance.
EPDM
Potable water service. NSF 61 and NSF 372 certified. UV and ozone resistant.
High-Temperature
Service up to 1,200°F where extreme heat exceeds standard rubber compound limits.
Stainless Steel Construction
For highly corrosive service, the Style 38 is available in all-stainless steel construction (Type 316 standard; Type 304 substitutable). Middle ring: Type 316 SS per ASTM A240 with No. 1 mill finish (optional A380 pickle-and-passivation finish). Followers: Type 316 SS only — single-piece thru 12 in, 2-piece bar follower for larger sizes. Bolts: Type 316 with rolled threads. Nuts: Type 316 with Xylan coating. Meets AWWA C219.
SS Working Pressure: 150 PSI · Test Pressure: 250 PSI. Stainless steel couplings are custom-built and made to order with extended lead times — consult factory for project requirements.
Engineering References & Downloads
Pipe OD Reference Chart
Outside-diameter cross-reference for steel, PVC, polyethylene, ductile iron, cast iron, and asbestos cement pipe — sizes ½ in to 60 in. Verify OD before specifying coupling size.
Download Pipe Chart
Style 38 Steel Submittal
Official Dresser submittal for steel pipe construction with full dimensional and pressure specifications. For engineering review and project files.
Download Steel Submittal
Style 38 Stainless Submittal
Official Dresser submittal for Type 304 / Type 316 stainless steel construction. Specifications for corrosive service applications.
Download SS Submittal
Sizes & Specifications — Steel Pipe
| Nom. Size (in) | Pipe OD (in) | Ring Length (in) | Bolts (Qty × Dia × Length) | Working Press (PSI) | Max Test (PSI) | Weight (lbs) |
|---|---|---|---|---|---|---|
| ½ | .840 | 3½ | 2 × ½ in × 6 in | 1500 | 2250 | 2 |
| ¾ | 1.050 | 5 | 2 × ½ in × 7¼ in | 1500 | 2250 | 3 |
| 1 | 1.315 | 5 | 2 × ½ in × 7¼ in | 1500 | 2250 | 4 |
| 1¼ | 1.660 | 5 | 2 × ½ in × 7¼ in | 1500 | 2250 | 4 |
| 1½ | 1.900 | 5 | 2 × ½ in × 7¼ in | 1500 | 2250 | 5 |
| 2 | 2.375 | 5 | 2 × 5/8 in × 8¼ in | 1500 | 2250 | 7 |
| 2½ | 2.875 | 5 | 3 × 5/8 in × 8¼ in | 1500 | 2250 | 13 |
| 3 | 3.500 | 5 | 4 × 5/8 in × 6 in | 1100 | 1650 | 13.5 |
| 4 | 4.500 | 5 | 4 × 5/8 in × 6 in | 1000 | 1500 | 16.5 |
| 5 | 5.563 | 5 | 4 × 5/8 in × 6 in | 1205 | 1808 | 23.5 |
| 6 | 6.625 | 7 | 6 × 5/8 in × 8¼ in | 1029 | 1544 | 31 |
| 8 | 8.625 | 7 | 6 × 5/8 in × 8¼ in | 807 | 1211 | 38 |
| 10 | 10.750 | 7 | 8 × 5/8 in × 8¼ in | 657 | 986 | 49 |
| 12 | 12.750 | 7 | 8 × 5/8 in × 8¼ in | 558 | 837 | 56 |
| 14 | 14.000 | 7 | 8 × 5/8 in × 10-3/4 in | 510 | 765 | 60 |
| 16 | 16.000 | 7 | 10 × 5/8 in × 10-3/4 in | 449 | 673 | 70 |
| 18 | 18.000 | 7 | 10 × 5/8 in × 10-3/4 in | 401 | 602 | 75 |
| 20 | 20.000 | 7 | 12 × 5/8 in × 10-3/4 in | 362 | 543 | 86 |
| 22 | 22.000 | 7 | 14 × 5/8 in × 10-3/4 in | 330 | 495 | 98 |
| 24 | 24.000 | 7 | 14 × 5/8 in × 10-3/4 in | 304 | 456 | 105 |
| 30 | 30.000 | 7 | 16 × 5/8 in × 10-3/4 in | 243 | 364 | 120 |
| 36 | 36.000 | 7 | 18 × 5/8 in × 10-3/4 in | 253 | 379 | 181 |
| 40 | 40.000 | 7 | 18 × 5/8 in × 10-3/4 in | Consult Factory | Consult Factory | 198 |
| 42 | 42.000 | 10 | 20 × 5/8 in × 15 in | 346 | 519 | 351 |
| 48 | 48.000 | 10 | 22 × 5/8 in × 15 in | 304 | 456 | 399 |
Working pressures per Dresser Style 38 Steel Pipe Submittal (2021), calculated per Barlow’s formula at ½ minimum yield. Sizes above 48 in available — consult factory.
Angular Deflection Per Coupling
| Pipe Size Range | 5 in Ring | 7 in Ring | 10 in Ring |
|---|---|---|---|
| ½ in thru 2 in OD | 6° | 6° | — |
| Above 2 in thru 14 in OD | 4° | 4° | 4° |
| Above 14 in thru 30 in OD | 2° | 4° | 4° |
| Above 30 in thru 37 in OD | 1½° | 3° | 3½° |
| Above 37 in thru 42 in OD | — | 2½° | 3½° |
| Above 42 in thru 54 in OD | — | 2° | 3° |
Pipe end must remain past end of gasket by minimum 1 in after deflection.
Applicable Standards
AWWA C219
Bolted Sleeve-Type Couplings
For plain-end pipe
ASTM A513 / A635
Middle Ring Steel
Material specifications
AWWA C111 / ANSI A21.11
Bolt Specifications
Industry-standard fasteners
NSF 61 & NSF 372
Potable Water Certified
Grade 27 and EPDM configurations
⚠ Seal Only — Pipe Joint Must Be Anchored
The Style 38 provides a pressure seal only. When pipe pullout could occur, the pipe joint must be independently anchored or restrained. Failure to anchor the joint could result in escaping line content and cause property damage, serious injury, or death. Confirm restraint requirements before installation.Installation — Step by Step
No special tools required beyond a torque wrench and basic hand tools.
- Pipe End PreparationClean all dirt, rust, oil, and loose scale from pipe end. Inspect gasket seating surface — any gouges or grooves must be corrected before assembly.
- Mark Center PointsMeasure back on each pipe end: ½ the middle ring length plus 2 in. Chalk mark both ends to center the coupling over the joint.
- Position FollowersSlide the follower(s) over the pipe end(s) before assembling any other components.
- LubricateWipe gaskets clean. Lubricate each gasket, pipe OD, and middle ring flares with soapy water or non-petroleum lubricant. Use antifreeze in freezing weather.
- Assemble Middle RingSlide lubricated gaskets over each pipe end, then assemble the middle ring onto one pipe end.
- Join Pipe EndsStab second pipe end into middle ring. Center between chalk marks. Pipe end must extend past end of gasket by minimum 1 in after any angular deflection.
- Install FastenersInstall all bolts and hex nuts. Draw up finger tight before torquing.
- Torque SequenceTighten nuts on opposite sides in a cross-pattern, drawing followers up evenly. Do not fully torque one side before the other.
Torque Specifications
| Bolt Diameter | Required Torque (Ft. Lbs.) |
|---|---|
| 3/8 in & ½ in | 35 |
| 5/8 in | 75 |
| ¾ in | 90 |
Important
For single-gasket products, reduce all torque values by one-half. Stainless steel bolts must be lubricated before installation to prevent thread galling.
Ready to Order?
Confirm pipe OD, gasket grade, and any special requirements before placing your order.
Submittal
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.3 ★★★★★
Based on 1386 reviews
Sort
Product Reviews
★★★★★ 5
Perfect Toy for Large Dogs
Size: Medium, Style: Cheddar Cheese
I don’t normally leave reviews, but this toy is stellar and is a new favorite for my dog! She is a large dog (70lbs cattle dog lab mix) and I accidentally bought a medium, but it actually is a great size for her! So far this stands up to her chewing, but I may need to update in a few weeks to speak for durability but it really does feel solid. Most toys don’t last an afternoon once she starts chewing, so this has already won in that regard. The shape is perfect as well. She can gnaw at it, squeak, play fetch, play tug. It bounces when she throws it around herself. The fact it smells like stinky cheese is just an added bonus for her. All around, a very well designed dog toy!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 27, 2023
★★★★★ 4
Boxer Baby’s Favorite
Size: Jumbo, Style: Beef
This toy is my sweet girl’s absolute favorite. It was the first thing we gave her when we brought her home, and she has been obsessed with it since. She brings it from room to room, inside and outside. I would highly recommend this toy, however, we have gone through six in one year. They’re not very durable, especially with our boxer mix, who is a very heavy chewer. I’ve gotten the red and the blue, and she will only take red, which is fine with me because the blue STINKS. The red stinks too, but less so. The squeak is very loud, but she genuinely loves it so much that it’s hard to be annoyed by it. I’d say give the toy a try, you may be unintentionally giving them their favorite thing ever lol.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 2, 2025
★★★★★ 1
Design Hazard
Size: Medium, Style: Bacon, Size: Medium, Style: Bacon
I have one of these in a larger version I picked up at the petstore. This one I do not recommend. There is a whole in the center where the pet bites down and my doggies' teeth kept getting stuck in it. If you've ever had a toy get stuck in your pups mouth, you've seen how thet go nuts trying to get it out.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 18, 2026
★★★★★ 5
Cane Corso approved
Size: Jumbo, Style: Beef
I have two Cane Corsos, One is 80 pounds the other is 120 pounds. They can seriously destroy some toys very easily. These chewies have actually lasted for over six months at this point, which is pretty much miraculous. I bought them some more just so I always had plenty of them laying around as this discourages them from getting into trouble, chewing things they shouldn’t be chewing. They walk around with these and their mouths all the time and even after all these months, the squeakers still work. These are really high-quality and if you have a dog that just destroys toy toy, I highly recommend these. Even though they’ve had these for months, they go back to them to chew on and play with , it’s also really funny because they walk around with one and hanging out of their mouth and it looks like they’ve got a stogie hanging out of their mouth. If these toys can keep the interest and survive being mauled by these two giant Destructo mutts, then they must be really, really tough. I highly recommend these for super chewers. These even a hold up to having one dog, grab each end and then play tug-of-war with it. These guys can Easily go through A cow huff every day, but these toys are still going strong
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 10, 2024
★★★★★ 3
Not a chew toy
Size: Medium (VALUE 2-Pack), Style: Beef
This is not for a voracious chewer...not durable. My dog destroyed in a matter of minutes, so the cost was high compared to the time it lasted. Maybe my expectation was too high but was disappointed in this product.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 16, 2026