large elephant ear plant Elephant Ear
SKU: 59651908642
large elephant ear plant

large elephant ear plant Elephant Ear

$20.94 $23.27
Save 10%
No.2 Bestseller on bionetnettoyage.com >

Pay in installments of $5.82 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jun 28 - Jul 3

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

large elephant ear plant Elephant EarPRESALE Spring 2026 Shipping Schedule: 3 20 2026 Nothing screams tropical in the summer garden than the magnificent Elephant Ear! These beloved, easy to grow tubers produce the most dramatic, exotic foliage summer to fall. There are two main types of Elephant Ears Alocasia (upward pointing, glossy leaves) and Colocasia (tall stems with velvety leaves that hang similar to elephants's ears). Elephant Ears range in color, height, pattern and texture.

PRESALE

Spring 2026 Shipping Schedule: 3/20/2026

Nothing screams tropical in the summer garden than the magnificent Elephant Ear! These beloved, easy to grow tubers produce the most dramatic, exotic foliage summer to fall. There are two main types of Elephant Ears - Alocasia (upward pointing, glossy leaves) and Colocasia (tall stems with velvety leaves that hang similar to elephants's ears). Elephant Ears range in color, height, pattern and texture. Colocasia esculenta is grown in Hawaii for food and is commonly known as taro.

About this Variety

What sets this Elephant Ear Black Stem Upright apart from the others are its chartreuse-yellow leaves with dark, blackish stems that give this variety its name.

Highlights

  • Exotic, tropical foliage
  • Grows well in containers
  • Foliage summer through fall
  • Thrives in moist areas, including standing water
  • Easy to grow

Exposure:

Full sun to partial shade

Blooms:

Foliage Summer to Fall

Height:

Grows 36-72" tall

Spacing/Depth:

Plant 18-24" apart, 2-4" deep

USDA Zones:

Grow as Perennial in zones 8-10, Grow as Annual elsewhere.

Growing Instructions

Plant Elephant Ears outdoors in the spring after all danger of frost has passed. Elephant Ears thrive in a full sun to partially shaded spot in moist, rich soil. Elephant Ears will tolerate full sun but prefer to have a little shade. Plant tubers 2-4" deep and 18-24" apart. When planting a large number of bulbs in one bed, excavate the entire area to the recommended depth, work fertilizer into the bottom of the trench, set out bulbs and then cover all at once. Water thoroughly at planting. While actively growing, water frequently and thoroughly so that water will reach roots. Mulch to keep the soil cool and to prevent the soil from drying out. Fertilize at planting and during growing season every two to three weeks. In areas where Elephant Ears are not winter hardy, dig up tubers in fall before frost. Clean off roots and store at 50ºF. Replant tubers in spring after all danger of frost has passed.

Care Tip

Elephant Ears are suitable for large pots, raised beds and will grow in standing water. Water well during dry periods. Some varieties of Elephant Ears can be grown indoors in a very bright location in consistently moist soil.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 59651908642
4.2 ★★★★★
Based on 1329 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
B
Verified Purchase
Bossman
Natrona Heights, US
★★★★★ 5
Absolutely Love This Receiver
The Onkyo TX‑NR7100 has completely transformed my home theater. The sound quality is rich, detailed, and powerful, and the 9.2‑channel setup gives movies and music a level of immersion I didn’t realize I was missing. Dirac Live right out of the box is a huge win — the room correction made an immediate, noticeable improvement. Setup was smooth, the interface is clean, and everything from streaming to switching inputs feels fast and reliable. It also plays perfectly with the rest of my system, and the THX certification really shows in how cinematic everything sounds. I absolutely love this receiver. It’s one of those upgrades that makes you wonder why you didn’t do it sooner.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 20, 2026
J
Verified Purchase
James Tepper
San Leandro, US
★★★★★ 5
Incredible 9.2 Surround receiver at an unbeatable price.
I may return at a future date to give a more complete review, but others that are much more knowledgeable about audio equipment than I have already done so. For me, the Onkyo (Onkyo TX-NR7100 9.2-Channel 8K/4K Network A/V Receiver) replaced a much older (2001) TX DS787 5.1 100 W Surround receiver that listed new for around $1050. I probably didn't pay quite that much but certainly something near $900. It was great for its time, perhaps even advanced with THX, Dolby, and other listening modes. But it didn't have: HDMI inputs or outputs, any BlueTooth capability, no hard wired or WiFi connectivity or basically any operating or connection modes that most all modern receivers have. This turned into a big problem with modern LED/LCD/OLED TVs, Alexa and other now common devices. I bought my new Onkyo TX-NR7100 from Amazon for $625. Other retailers (e.g.Best Buy) advertise it for up to $1200, so Amazon's price is outstanding. Set up was far more complicated (for me) than any previous receiver that I ever owned, mostly because there were a very large number of back panel input and output jacks, to and from the TV, as well as speaker outputs for 9.2 surround. Suffice it to say that once everything was connected properly (I made a few mistakes along the way), I was completely thrilled. The On Screen Display, completely accessible either from the front panel or the remote was far superior to anything I had ever seen before. Literally every operating parameter is accessible to the user. And I used most of them. It is also completely WiFi ready so my 150 Gbit home Wifi network lets it connect wirelessly and stream music error free. BlueTooth is also another way to connect almost any device to it for audio and audio/video playback if you connect the digital connections to and from a modern TV. It also speaks and listens to Alexa, although I must confess that I haven't played around with that much yet. This is already much longer than I had intended, so let it suffice to say that the Onkyo TX-NR7100 is an absolutely incredible receiver for an incredible price. I'd give it 8 stars if I could. JM TEPPER
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 7, 2024
B
Verified Purchase
Brian M.
San Leandro, US
★★★★★ 5
Sounds great.
Just received my Onkyo TX-NR 7100, watched a few YouTube videos before it arrived, so set up was easy. Ran accuEQ, I am getting new front speakers so I’ll wait to run Dirac. After accuEQ, I still had to make a few adjustments, to the speaker levels and especially the sub. It set my subwoofer way too low. As of right now having no problems with Bluetooth. I’ve only listened to music so far, can’t wait to watch a movie. For now I have a 5.1.2. System, getting new fronts, the Klipsch r51-m’s will go to the rear surround and Klipsch r41-m’s will be my height speakers in a 5.1.4 system. So far loving this avr. Update 2: Just calibrated with Dirac for the 6th time. They tell you if you sit in a recliner, reclined measure with it reclined. Well I measured with the chair in its upright position. It makes a huge difference I hear the surrounds much better. Btw I listen to all channel stereo, I know audiophiles say it sucks, however I listened to 2 channel stereo for 20 years, when there was nothing else. I didn’t buy a 9 channel avr to listen to 2 channel stereo. Like Randy the cheap audio man says “ audiophiles aren’t always right. If it sounds good to you, that’s all that matters.” So try calibrating in the upright position, or if you sit on a stationary chair or couch, try positioning the mic slightly forward of your listening position. It makes a huge difference. Hope this helps, enjoy. Update: Ok bought Klipsch rp-600m speakers for the front with 52c center. 51m surrounds, 41m rear heights. Polk owm3 front heights. Why Polk? Lighter easy to hang and as height speakers they are only there for atmos. Ran Dirac live, the application does what it would take several hours to make it sound like it does, if I even could get it to sound so good. Apple TV 4K with my Hisense U8K. The google tv interface is ok, but Apple TV is faster and easier. The Onkyo 7100 is a gem, runs pretty warm but I have it out in the open. If you are going to put in a cabinet I suggest a fan. Very happy with the whole system.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 11, 2025
A
Verified Purchase
Amazon Customer
Phoenix, US
★★★★★ 5
Great for UTV rear light install!
Size: 16AWG -10FT 2Pin DT
I had a set of 3” Nilight pod lights with wiring harness to install as rear lights on my Ranger 570 SP. The Nilight harness with relay was great! But it was too short to keep the relay and fuse in the front compartment on the pulse panel. These were the perfect solution! The extensions are plugged in under the tunnel to each of the individual light leads from the Nilight harness. And there was just enough length to run behind the seat back, up the driver side roll bar, and to each light. (Had about 1’ too much for passenger side light, so should be fine for full-size Ranger too.) Now have a weatherproof, factory quality installation with no splices or solder joints. The only mods I had to make for the entire install (not related to these extension cables) were: 1) Cutting the ring lugs off and adding waterproof heat shrink butt splices to Polaris pulse plug, and 2) Buying a factory-style Carling L1 illuminated switch to replace the round switch provided. (This is a direct plug and play too since the Nilight switch wiring has 1/4” faston connectors.)
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 27, 2024
M
Verified Purchase
Marshall Quinn
West Palm Beach, US
★★★★★ 5
Exactly what I needed
Size: 16AWG -10FT 2Pin DT
This was perfect for me. I had two lights bars in my rear bumper and needed to extend the harness to my fuse block. Great value
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 19, 2026