yucca cane soil mix Beaked Yucca Tree
SKU: 30516578626
yucca cane soil mix

yucca cane soil mix Beaked Yucca Tree

$26.95 $29.95
Save 10%
No.2 Bestseller on bionetnettoyage.com >

Pay in installments of $7.49 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jun 28 - Jul 3

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

yucca cane soil mix Beaked Yucca TreeAttention plant lovers: are you looking for a tree like plant that will make your garden stand out? Look no further than Yucca rostrata, also known as the beaked yucca tree. The Yucca rostrata has several other common names, such as Big Bend Yucca, Beaked Blue Yucca, Silver Yucca, Nordstrom's Yucca, Blue Yucca rostrata, and Adam's Yucca. Yucca rostrata is a slow growing evergreen, tree like succulent that belongs to the Agave family. Native to the

Attention plant lovers: are you looking for a tree-like plant that will make your garden stand out? Look no further than Yucca rostrata, also known as the beaked yucca tree. The Yucca rostrata has several other common names, such as Big Bend Yucca, Beaked Blue Yucca, Silver Yucca, Nordstrom's Yucca, Blue Yucca rostrata, and Adam's Yucca. 

Yucca rostrata is a slow-growing evergreen, tree-like succulent that belongs to the Agave family. Native to the Chihuahuan Desert in northern Mexico and Southwestern Texas, this yucca species is known for its striking pom-pom-like appearance, with a single trunk that can reach heights of up to 15 feet and a crown of long, narrow, bluish-green leaves. The leaves are rigid, sword-shaped, and have sharp tips, hence the name "Beaked Yucca." 

The mature size of Yucca rostrata can vary depending on growing conditions, but on average, the crown of leaves can spread about 10 feet in diameter. The beaked yucca is a stunning plant that is often referred to as a yucca tree due to its tall and tree-like appearance. However, despite its name, it's not actually a tree but a succulent. Succulents are plants that store water in their leaves, stems, or roots, allowing them to thrive in arid conditions. While some succulents can have a tree-like form, they are not classified as "true" trees in the traditional sense. The rosette of leaves is located at the top of the trunk, which is covered with the soft gray fibers of old leaves. 

The flowers of Yucca rostrata bloom in the late spring, producing elegant tall flower stalks that can reach up to 10 feet in height. The flowers themselves are creamy white and bell-shaped, with a delicate and fragrant aroma that attracts pollinators like bees and butterflies. These clusters of white flowers of Yucca rostrata add a touch of beauty and grace to the already stunning presence of this desert plant.  

Yucca rostrata is generally considered to be non-toxic to humans and pets. Its unique appearance and low maintenance requirements make it a popular choice for both landscape and container gardening. 

Watering Needs 

When it comes to Yucca plant care, it's important to strike the right balance. This tree-like Yucca plant is native to arid regions, so it has adapted to survive in dry conditions. As a result, it prefers infrequent deep watering rather than frequent shallow watering. 

During the growing season, which is typically spring and summer, you should water your drought-tolerant Yucca rostrata once every two to three weeks. Make sure to thoroughly saturate the soil around the blue Yucca plant, allowing the water to reach the roots. This will support the plant's deep-root development and increase its resistance to drought.

In between waterings, it's crucial to let the soil dry out completely. Yucca rostrata does not like to sit in wet soil, as it can lead to root rot. So, before watering again, check the moisture level by sticking your finger about an inch into the soil. If it feels dry, it's time to water. If it's still moist, wait a few days before watering.

During the dormant period, which is typically fall and winter, Beaked Yucca requires even less water. Reduce the frequency of watering to once every four to six weeks, allowing the soil to dry out even more between waterings. This will mimic the plant's natural conditions during the colder months.

Remember, it's always better to underwater than to overwater Yucca rostrata. This beaked yucca blue plant is quite resilient and can tolerate drought conditions, but it does not fare well in soggy or waterlogged soil. So, keep an eye on the moisture levels and adjust your watering schedule accordingly, and your Yucca rostrata will thrive! 

Light Requirements 

 When growing your Yucca rostrata indoors, it's essential to provide it with bright, indirect light (partial shade) for at least 4-6 hours daily. Place your Yucca rostrata near a window where it can receive plenty of natural light, but make sure to protect it from direct sunlight, as it can scorch the leaves. If you don't have a suitable window, you can also use artificial grow lights to provide the necessary light for your indoor Yucca rostrata. 

If you are growing your beaked yucca plant outdoors, it will thrive in full sun, so it needs at least six hours of direct sunlight per day. Place it in a location where it can receive ample sunlight, such as a south-facing spot in your garden. This will ensure optimal growth and development of your Yucca rostrata. 

It's worth noting that beaked Yucca rostrata is a tough Yucca plant and can tolerate some shade, especially during the hottest part of the day. However, for the best results and to maintain its compact shape and vibrant color, providing it with full sun is ideal. 

Remember, whether you're growing Yucca rostrata indoors or outdoors, it's important to find the right balance of light. Too much direct sunlight can cause leaf burn, while insufficient light can result in leggy growth and a lack of vigor. By providing your Yucca rostrata with the appropriate light conditions, you'll help it thrive and showcase its unique beauty! 

Optimal Soil & Fertilizer Needs 

The beaked Yucca rostrata favors very airy, sandy soil that drains well. Planting them in ordinary soil will result in compacted roots, stunted growth, and, most likely, root rot. To create the optimal soil mix, you can combine equal parts of sandy soil, perlite, and peat moss. This will help promote good drainage while retaining some moisture to keep the roots hydrated. Avoid using heavy clay soils or potting mixes that retain too much water, as they can lead to root rot. 

Instead, make or buy a well-draining potting mix, or ideally, use our specialized succulent potting mixGo to https://planetdesert.com/collections/soil-top-dressing-and-amendments/products/soil-cactus-mix-blend-1-gal-4-qt-cacti-succulent-dirt-compost-growing-media that contains 5 natural substrates and mycorrhizae to promote the development of a strong root system that helps your Yucca plant to thrive. 

When it comes to fertilizing Yucca rostrata, it doesn't require frequent or heavy feeding. In fact, too much fertilizer can be detrimental to its growth. A slow-release, balanced fertilizer with an NPK ratio of 5-10-5 can be applied once a year in the spring to provide a gentle boost of nutrients. Be sure to follow the instructions for the correct dosage.

Apply it sparingly around the base of your beaked Yucca plant and gently work it into the soil. Remember, less is more when it comes to fertilizing Yucca rostrata. Overfertilizing can lead to excessive growth and weak stems. 

By providing Yucca rostrata with well-drained soil and a light touch of fertilizer, you'll help it thrive and maintain its natural beauty. Remember to monitor the moisture levels and adjust your watering and fertilizing accordingly. 

Hardiness Zone & More 

When it comes to growing Yucca rostrata indoors, it can adapt well to a wide range of temperatures. Ideally, indoor temperatures should be kept between 60-80°F during the day and slightly cooler at night. Yucca rostrata can tolerate higher temperatures, but it's important to avoid extreme fluctuations or prolonged exposure to temperatures below 50°F. 

If you're planning to grow your beaked Yucca rostrata outdoors, it is generally hardy in USDA zones 5-10. Yucca rostrata is known for its remarkable ability to withstand cold temperatures. It is one of the hardiest yucca species and can tolerate temperatures as low as -10 degrees Fahrenheit. 

However, it's worth noting that extremely cold temperatures, especially when combined with wet conditions, can be detrimental to Yucca rostrata's health. If you live in a colder climate, it's advisable to provide some protection, such as covering the plant or moving it to a sheltered location during harsh winter conditions. 

In terms of humidity, Yucca rostrata is a desert plant and can tolerate low humidity levels. It prefers drier conditions, similar to its natural habitat. Indoor humidity levels between 30-50% are generally suitable for Yucca rostrata. If the air in your home is particularly dry, especially during winter months, you can increase humidity levels by using a humidifier or placing a tray of water near the Yucca plant. 

Remember, providing Yucca rostrata with the appropriate temperature and humidity conditions, whether indoors or outdoors, will help ensure its overall health and vitality. 

Propagating Yucca rostrata

Propagating Yucca rostrata can be done through both seeds and offsets. If you're starting from seeds, it's best to sow them in a well-draining soil mix and keep them slightly moist until germination occurs. This process can take a few weeks to a couple of months. Once the seedlings have grown a bit, you can transfer them to individual pots. 

Additionally, you can propagate your Yucca rostrata through offsets. Yucca rostrata naturally produces offsets, which are small plantlets that grow from the base of the parent plant. To propagate using offsets, carefully separate them from the parent plant, making sure each offset has some roots attached. Plant the offsets in a well-draining soil mix and provide them with the same Yucca plant care as mature plants. 

Remember to be patient when propagating Yucca rostrata, as it may take some time for the new plants to establish and grow.  

The Bottom Line 

Overall, the Yucca rostrata (Beaked Yucca) is a stunning and resilient Yucca plant that can bring a touch of desert beauty to any garden or landscape. With its tall, slender trunk and striking blue-green leaves, it adds a unique and striking focal point to any space. Not only is Yucca rostrata visually appealing, but it is also a low-maintenance, cold, hardy plant that can tolerate a wide range of conditions, including drought and poor soil. Its ability to thrive in harsh environments makes it a great choice for xeriscaping. 

Whether you're a beginner or an experienced gardener, Yucca rostrata beaked yucca is a fantastic addition to any succulent plant collection. So, if you're looking for a succulent that combines beauty and resilience, Beaked Yucca rostrata is definitely worth considering. 

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 30516578626
4.5 ★★★★★
Based on 295 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
D
Verified Purchase
Dave
Pawtucket, US
★★★★★ 1
Review from an "actual" tall person who doesn't weigh 400 pounds.
Color: Black
I recommend this chair. Firstly, I looked at least dozens of chairs and nearly every review in trying to select a chair. I didn't want to spend $200. It's confusing because everyone's idea of perfect is of course subjective. One thing, What is tall? I'm 6'6" I think that's pretty tall. Others feel that 6'0" is tall. LOL In the listing, it shows this chair is good for a 6'5" person which I think is pretty accurate. I weigh about 210 pounds and the padding is just fine. One thing I would push manufacturers to do would be to give accurate measurements. Seat height low and high. Back support height. Head rest added to back height etc.! Maybe actual human measurements that the chair is geared toward. Nice to know that 400 lbs is cool but that doesn't tell me much. My primary goal was to find a chair I could sleep in because I recently had a back injury and sleeping on my bed, while fine, resulted in intense pain trying to get up in the morning. We'll see what happens but the headrest reaches my head which was goal one. The lumbar fits so I don't need to use cushions and pads etc. I found the upper position of the support to be right for me and it's super comfortable. Plus number two. The raised height of the chair fits my long legs (inseam 36") Plus three. I wanted adjustable arm rests but this one doesn't have that. No biggie, for me the height of the arm rests is pretty much just right. It might be a little high for some. The back leaning adjustment doesn't lock except for upright. Locking upright is good, and leaning back - for me - doesn't really need to lock. Being an actual tall person made me really skeptical. I'm relieved that I won't have to take it apart to return it. The assembly was straight forward and pretty easy though I'd suggest not really tightening the arms snugly before getting the back squared away - the alignment is easier if you do that. I got the chair for $109 with 21% off. It's slightly wobbly yet feels pretty well made. It rolls well enough. I'm quite satisfied with the purchase and I'll come back if there are updates. Edit one. I've had it a week now and found I couldn't sleep in it. I think it would be better if the back could recline separately from the seat. There might also be figuring out a way to support my legs due to the back and seat reclining together rather than separately. Two. I kind of wish more now that the arms were adjustable for height and tilt if that makes sense. I have a bar stool next to me on the right in front of my desk that is the right height to relax my right arm while reaching my mouse on the desk so that's my work around there. Three. The casters are kind of basic and don't roll as easily on the floor matt as my former second hand chair - they would probably be fine on a hard surface. I'll probably switch them out. Four: The lumbar support, while mostly in the right place is unpadded and creates kind of a hard spot there. I've re-introduced my lumbar support pillows for comfort there. All in all, I'm still happy with the $100 purchase. In my experience, being pretty tall always comes with compromise and these notes are not deal breakers for me. Yea, It can always be more perfect but unless you're in a showroom test driving and willing to spend $300? Right. UPDATE: I'm really not satisfied with this chair and in fact, I wish I hadn't bought it. Firstly, the pneumatic post that the chair part connects with is wobbly depending on which way it is facing according to which way the legs are aligned. It's like a poor fit and I'm pretty mechanically inclined. Second and also important. The lock to keep it upright and inclined only worked for a few weeks. For a while, you had to mess with it to engage the upright position. It no longer works. Worse than that, the lumbar support pad disconnected with the chair and is now floating and after only a month or so, the remaining supports for the Lumbar rest have dug into the fabric on the back of the chair creating holes in the back's fabric. I've tried but there is no way to reconnect that bit without removing the back's fabric as far as I can see. I'm taking this down to one star for sure. Poor design? Poor manufacturing? Yea. I wouldn't suggest this chair to anyone. If the company comes up with a solution, I'll continue my review. As for now. Not a recommendation. Update: Not impressed and kind of crappy. Mentioned is that the so called lumbar thingy disconnected and is unusable. I've got my own pad which seems to help. Also, it's wiggly where the chair connects to the base. Months later, I might toss it and go back to the chair I bought locally and second hand. Don't buy this chair!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 20, 2025
Q
Verified Purchase
QZ
Draper, US
★★★★★ 5
Great Instructions, Straightforward Assembly
Color: Black
I just received this chair today, so my product review is mostly on the packaging, instructions, and assembly. The product was well-packaged, and it was obvious when I unboxed it that a lot of care and thought went into packing it in the most efficient way that would also protect the parts. I was positively impressed with the packaging. I was also incredibly impressed with the instructions and assembly process. I am used to cheaper products where the parts only half fit or important components are missing, or where the instructions were confusing and unclear. This chair's instruction manual was very clear and concise. The diagrams were easy to understand and neat. The screws came labeled and separated and also included the scew types and sizes/lengths, which is handy in case you need to pick up extras at a store somewhere. But they also included one extra of each type of screw, washer, and cover, which I appreciated during assembly. (I didn't find myself worrying what would happen if I dropped a screw, which is something I would normally be distsracted by while working.) The only things I would take points off for were these: 1. The instructions said the chair came with gloves for assembly, but no gloves were included. That was fine with me, but why mention them if you won't include them? The instructions even later say not to use the chair if not all components were present...but all the important ones were, so I assembled it without gloves (as I probably would have done anyway, since it was for me and not another person). 2. It matters which side of the seat is the front, but the sticker was confusing. The instructions show a sticker placed on the side that is the front, and that is where my sticker was placed. However, the sticker says "FRONT" and has an arrow pointing somewhere. In the instructions this arrow pointed to the front. On my seat, however, the arrow pointed to the back. So am I supposed to believe the sticker placement (it was diagonal, so it looked haphazardly slapped on) or the arrow? On that particular step the piece you are screwing into the seat can fit both ways, but thankfully there is a later step where it becomes obvious which side is the front vs. the back. (The arm rests can only be attached to the back.) So I wish that had been clearer up front, but otherwise it was okay. Recommendations for assembly: - To attach the wheels, apply firm, direct, straight-down pressure. I tried screwing them on at first but you just push. Make sure they go in the whole way like the picture shows. - When they say to tighten the screws to only 60%, it's a helpful tip, because you can't fit the armrests on both the seat and chairback at the same time with the screws completely tightened. Just tighten them enough to fit the pieces on, then later you can tighten up the screws. So far I find the chair to be very comfortable and I'm exceedingly happy with it. The lumbar support seems like it could potentially be a little chafy or scratchy, but I'll give the chair a chance before deciding if it's problematic or not. Like I said, I only got the chair today, so I can't speak much to its long-term comfort, durability, or longevity. But I was so impressed with how easy and straightforward they made the assembly that I had to write a review to show my appreciation.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 9, 2026
A
Verified Purchase
Alicia Sherman
Carnegie, US
★★★★★ 3
It's okay
Color: Black
Appeared to be a super comfortable chair. Purchased for my mother to work from home and the material is apparently slightly itchy and the arm rest isn't quite comfortable. It was pretty simple to put together but it did take some time.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 11, 2026
C
Verified Purchase
Corbin
Natrona Heights, US
★★★★★ 5
An Actual Nice Chair for a Decent Price. +2 for the Tool.
Color: Black Grey
Welp, My old chair finally broke, so It was time for a new one. I ended up coming across this chair here, and I couldn't really find anyone talking about it online. I decided to give it a shot since it was on a good sale for Christmas, going down to 99$. I'm going to be honest, I am pleasantly surprised. The cushioning for it is a little firm, but that is perfect for me. Its pretty average when it comes to office chairs, but having the added lower back support is a great touch. I have no complaints about it. The one thing that I am actually really happy about isn't on the chair. Don't get me wrong, over the week I have been using it, It has been nothing but great. That thing is the actual tool it came with. Its a basic Allen key, but the top of it is a molded handle instead of a "L" piece of metal. It made the already easy process of putting together this chair even better. Even after this chair has ran its course like all other chairs, I'm going to still use this tool. So yeah, I think 5 - stars pretty accurately describes how I feel about my chair.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 2, 2026
D
Verified Purchase
DEVON
Draper, US
★★★★★ 5
COMFY CHAIR GOOD SUPPORT
Color: Dark Brown
So I needed an office chair because the one that I had wasn't really helping my back any. And it just didn't have enough cushion on the chair because when you want to sit for hours at your desk you want to be comfortable. So I took a chance on buying this chair. I thought the color was good and the price was right but I was still a little nervous because it said put together. So I got it right away only took 3 days. And the directions for pretty easy there were a couple of spots that I think we're out of order because you had to kind of play around with the screws going into the holes from the arms but I think if I were to get another chair like this I would probably do it my way because it's pretty self-explanatory but I followed the directions that came with the chair. And hey I'm 65 years old and I put this chair together. It's nice it's sleek and oh my God is it comfortable!!! Right where my lower back and sciatic is I get the support and it just feels good and I know that if I have to be at my desk for 3 or 4 hours I'm going to be comfortable. I highly highly recommend getting this chair. The only issue that I had was the driver did not leave it on my porch. I had ordered a Vizio TV a couple months ago and the driver brought it up to my porch. So I just had to go out and take two steps bring it into the house I really appreciated that. This driver didn't even come through the gate and there is no signs of any dogs because there aren't any. So this driver just left this giant heavy box it was about 35 lb in front of the garage where it was very visible from the road. And I had a dragon to my front door it was heavy I did not like that at all. But it wasn't damaged or anything and I do love the chair. I just don't like what the driver did.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 3, 2025